Spec Sheet

CEILING TILE

INTEGRAL TILE SUPPORT RAIL

CEILING GRID

CSD1X2

Bogen's Drop-In Ceiling Speaker is a full-range speaker

that allows for fast and easy installation. Just make one

simple cut to the ceiling tile and drop the CSD1X2 into

place.

• One-piece assembly saves installation time, effort, and cost

• 1 ft. x 2 ft. finely perforated grille over the entire speaker front

• Fully enclosed, industrial grade steel construction

• Plenum-Rated — meets requirements of UL standard 2043

for smoke and heat release (report available online)

•

70V/25V, 4-watt transformer (4, 2, 1, .5, .25 watt) taps;

selected by rotary switch

• 8” main cone with secondary high frequency cone

•

Integral tile support rail

• For use with both 2 ft.x 4 ft. and 2 ft.x 2 ft. suspended tile ceilings

• Seismic attachment point

CSD1X2 Drop-In Ceiling Speaker

PAGE 1
CSD1X2 Drop-In Ceiling Speaker Bogen's Drop-In Ceiling Speaker is a full-range speaker that allows for fast and easy installation. Just make one simple cut to the ceiling tile and drop the CSD1X2 into place. • One-piece assembly saves installation time, effort, and cost • 1 ft. x 2 ft.
PAGE 2
CSD1X2 Drop-In Ceiling Speaker SPEAKER ENCLOSURE ELECTRICAL BOX SEISMIC ATTACHMENT POINT ROTARY TAP SELECTOR SWITCH ELECTRICAL BOX COVER INTEGRAL TILE SUPPORT RAIL WIRE NUTS FOR CONNECTIONS FINELY PERFORATED METAL FINISH GRILLE S P E C I F I C AT I O N S Frequency Response . . . . . . . . . .110 Hz - 20 kHz SPL @ 1W / 1M . . . . . . . . . . . . . . . 94 dB Dispersion @ 2 kHz (6 dB down) . . . . . . . . . . . . . . . . . .100° Cone Material & Surround . . . . . . Treated paper Cones . . . . . . . .