Specifications

Product Features:
• 3-Zone paging plus All-Call; 3 easily programmable zone groups
(1-3 zones in each)
• One-way and two-way paging (talk back operation requires
TBA15 Talk Back Amplifier)
• Directly interfaces to paging ports (requires contact closures),
loop start, and ground start trunks
• Interfaces to station ports using TAMB2 Telephone Access Module
• Operates with central-amplified (70V) and self-amplified (24V) paging systems
• Pre-announce, confirmation tones, privacy beep, night ringer, selectable tones
• Separate volume controls for tones, night ring, and background music
• 24V or 48V talk battery option (requires additional PRS48 power supply)
• 100 watts total power handling capability
• Background music input
• FCC Part 68 Registered
Accessories
Zone Groups
One unique feature of the ZPM3 is its
ability to group together a number of
zones and page in to them at the same
time. However, the people you are trying
to contact may spend their time in more
than one zone area. By grouping zones,
you increase your chance of contacting
that person.
An example of a typical 3-zone facility is a
medium size location with an office area,
manufacturing area, and warehouse. Each
area is set up as an individual zone.
By grouping two zones and paging simul-
taneously into both, the chances of the page
being heard by the specific individual are
greatly improved.
For this same facility, the ZPM3 can also
produce a tone that will be heard only in
a specific group of areas. An external
contact closure from a master clock is
typically used to trigger the tones.
PRS48
Power Supply
(48V DC)
TBA15
Talk Back Amplifier
TAMB2
Telephone Access
Module
PRSLSI
Power
Supply
(24V DC)
3-Zone Paging Module
ZPM3
The ZPM3 allows for economical one- or two-way paging
(with TBA15 Talk Back Amplifier) to be directed to any
of up to 3 different paging areas. Zones can be grouped
together so that more than one zone is paged at the
same time. All areas can also be paged at once. Zone
selection can be made using DTMF tones or pulse dialing.
Power Product
Requirements Dimensions Weight
External 24V DC @ 350 mA 9" W x 7-1/4" H x 1-3/8" D 3 lb.
www.bogen.com
36
PAGING CONTROL
ZONE CONTROL MODULE
Product Features:
• Ethernet connectivity and full IP compatibility with
existing routers and WAN infrastructure
• Single- or multi-zone paging at any or all locations when
used with Bogen's Multi-Zone Universal Telephone Interface
(UTI312); 1-, 2-, 4-, and 8-port/zone models available
• Efficiently communicate company-wide emergency alerts
or general announcements, saving both time and money
while improving communication
• Connects directly to phones or PBX; compatible with
virtually any telephone port type
• One-port model supports FXS and FXO; multi-port models
support FXS, FXO, and E&M
• FXS/FXO connector on each port for direct analog conn-
ection to Bogen's telephone paging interfaces
• Multi-port models provide contact closure Receive
& Transmit in E&M mode capabilities
• Gateways are easily managed using a Windows
®
-based soft-
ware application or remotely with a web browser or SNMP
• Can also be used for toll-free voice and fax communication
when connected to phones, fax machines, key systems, PSTN
lines, or a PBX to provide real-time, toll-quality voice connec-
tions to any office on your VoIP network
• FCC Part 68 Registered/UL and C-UL listed
Bogen's Voice Over IP Gateways (VoIP) allow paging commu-
nications to be sent over the Internet or Intranet. Each gateway
connects directly to Bogen paging systems and equipment to
provide overhead paging to all locations in a facility or across a
campus without running new lines.
Dimensions
1 4-3/8" W x 1" H x 5-5/8" D 1 lb.
2 6-1/4" W x 1-1/2" H x 9" D 2 lb.
4 17-1/2" W x 3-7/8" H x 8" D 8 lb.
8 17-1/2" W x 3-7/8" H x 8" D 8 lb.
MVP130BG
MVP210BG
MVP410BG
MVP810BG
Product
Weight
Max. Port
Capacity
Network-Enabled Paging
MVP130BG, MVP210BG,
MVP410BG, MVP810BG
VOIP GATEWAYS FOR PAGING
Windows
®
is a registered trademark of Microsoft.