Specifications are subject to change without notice. New Jersey • Tennessee • Florida 1-800-999-2809 www.bogen.com PRODUCT CATALOG 109 54-9215-01J 1409 © 2014 Bogen Communications, Inc. . O F.P. BOGEN COMMUNICATIONS, INC. INSTALLATION CASE STUDIES Bogen products have been used in numerous types of applications, each with its own unique requirements. Whether simple or sophisticated, installations around the world benefit from Bogen products.
ABOUT BOGEN TABLE OF CONTENTS } Speakers & Accessories . . . . . . . . . . . . . . . pages 1–14 } Easy Design/Easy Install Speakers . . . . . pages 15–21 } Paging & Telephone Electronics } Self-Amplified (24V) Systems } Music & Input Sources, Microphones . . . pages 55–60 . . . . . . . . . pages 22–29 . . . . . . . pages 52–54 } Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . page 30 } Office Communications . . . . . . . . . . . . . . .
PRO AUDIO LOUDSPEAKERS Powered Loudspeakers BP12DSP BP15DSP, BP12DSP Product Features: BP15DSP Accessories See Page 80 Te c h n i c a l S p e c i f i c a t i o n s : Transducer Model BP15DSP BP12DSP Low: 15” Neodymium Woofer; 2.5” Voice Coil High: 1” Compression Driver; 1.75” Voice Coil Low: 12” Neodymium Woofer; 2.5” Voice Coil High: 1” Compression Driver; 1.
ORBIT SERIES SPEAKERS OCS1B SPEAKERS ORBIT Ceiling Speakers OCS1W, OCS1B Orbit Ceiling Speakers are the ideal choice for installations where the quality of music and vocal reinforcement are crucial.
SIGNATURE SERIES LOUDSPEAKERS S5/S5T SPEAKERS S4/S4T SIGNATURE Series High-Performance Foreground Loudspeakers S4/S4T & S5/S5T Signature Series S4 & S5 Loudspeakers are compact, versatile, and feature unique driver technologies, which produce impeccable sound quality. With their compact form factor, these speakers are an excellent fit for most indoor environments or protected outdoor locations.
SPEAKERS Armadillo Speakers Form follows function in the A-Series, a.k.a., the “armadillo” line. Its unique rounded ends and side corrugations, which give the speakers their characteristic “armadillo” shell look, are constructed of mineral-filled polypropylene. This dense molded material creates an extremely durable cabinet with excellent acoustic properties. Cabinet and components are impervious to salt spray and dust.
A-SERIES LOUDSPEAKER A12 The A12 High-Output, Long-Throw Loudspeaker provides deep, rich bass and smooth highs as a complement to other A-Series loudspeakers. The A12 is a high-powered speaker that projects well in far-field applications as well as in more intimate settings. A built-in transformer means one speaker will work with 70V or 16-ohm systems.
CEILING SPEAKERS SPEAKERS High-Fidelity Ceiling Speakers HFCS1LPB HFCS1LPW HFCS1 & HFCS1LP Bogen’s coaxial and 2-way, High-Fidelity Ceiling Speakers deliver unsurpassed performance and value.
CEILING SPEAKERS High-Fidelity Ceiling Subwoofer The Bogen CSUB Ceiling Subwoofer delivers outstanding bass response in both suspended ceiling and hard-surfaced installations. The CSUB can provide deep, rich bass response to any speaker system. Perfect accompaniments to the CSUB are the HFSF1, HFCS1/LP, and OCS1 ceiling loudspeakers. The CSUB offers six levels of power output settings plus an 8-ohm position controlled via a front-mounted, rotary tap selector switch (under grille).
DROP-IN CEILING SPEAKERS Bogen's Drop-In Ceiling Speakers are full-range loudspeakers that allow fast and simple installation, which saves time, effort, and cost. Depending on whether your ceiling grid is 2' x 2' or 2' x 4', the speaker can be dropped directly into place or by simply making a single cut to the ceiling tile, placing the tile support rail, and then inserting the speaker into position.
DROP-IN CEILING SPEAKERS Modular Drop-In Ceiling Speakers Speaker Module This compact speaker module is a component of your speaker assembly. Both the MCD1X2U and MCD2X2U assemblies utilize the MCDMOD speaker module to reinforce sound.
METAL BOX SPEAKERS SPEAKERS Metal Box Speakers MB8TSL, MB8TSLVR, MB8TSQ, MB8TSQVR MB8TSL Bogen’s Metal Box Speakers feature all-steel construction, surface-mounted enclosure with an 8" cone loudspeaker and 4-watt 70V/25V transformer. The MB8TSL is designed primarily for wall mounting, and its face is angled downward 12.5 degrees. The MB8TSQ is suitable for ceiling or wall mounting. “VR” versions include a recessed volume control.
CEILING SPEAKER ASSEMBLIES SEC4T S810T725PG8W(U) S86T725PG8W(U) & Variations & Variations S86 & S810 available in Bright White (“U” versions) & Off-white (“W” versions) Both the S86 & S810 Ceiling Speaker Assemblies consist of an 8" Cone Speaker pre-assembled onto a 13" steel ceiling grille painted with off-white (PG8W) or bright white (PG8U) enamel. Options for these assemblies are recessed volume control (VR), volume control with knob (VK), and rear-mounted screw terminal strip for power taps (BR).
FOREGROUND SPEAKERS SPEAKERS FG-Series Speakers The FG-Series of 2-way speakers is designed to deliver high-quality, wide frequency response audio in a compact cabinet. These speakers are perfect for supplying foreground as well as background music.
HORN LOUDSPEAKERS Special Protection SPT15A, SP158A, SPT30A+, SP308A+ BDT30A* 4 5 3 Bogen’s Horn Loudspeakers offer high efficiency and excellent intelligibility. Rotary switch-selected power taps make installation quick and easy. SPT and BDT models are compatible with 70V and 25V paging systems, SP models are 8-ohm versions. The KFLDS30T is a 70V/25V wide dispersion, high-intelligibility, reentrant type loudspeaker. The IH8A is a paging horn.
SPEAKERS Bypass Feature In certain rooms such as training or conference rooms where meetings or presentations are held, paging announcements are considered interruptions. To avoid or eliminate such interruptions, speakers installed in these rooms may use attenuators to set speaker volume low or off. In these cases, emergency messages would not be heard by individuals in these rooms.
EASY INSTALL /EASY DESIGN SPEAKERS ® TM Surface-Mount Ceiling Speakers SM1EZ, SM4T Product Features: • No-Tool Installation. No tools needed; everything you need is right in the box. • Contemporary, Low-Profile Design. Looks good in any environment. • No Clean-Up. Installation means piercing ceiling tiles, NOT cutting them. So, there’s virtually no mess and no ceiling tile pieces to clean up. • SM1EZ is a one-watt, single tap speaker.
EASY DESIGN SPEAKERS TM Ceiling Speaker EASY DESIGN TM CS1EZ Bogen’s CS1EZ is a pre-assembled ceiling speaker comprised of an 8" cone speaker and steel ceiling grille painted with enamel. The CS1EZ includes a volume control knob and rear-mounted screw terminal board for easier electrical connection. Product Features: Dimensions Product Weight 13" dia. x 3-1/4" D • Heavy-duty, wire-wound volume control with knob • 50 Hz-12 kHz frequency response • 95 dBspl @ 4 ft.
EASY DESIGN GUIDE TM What is Easy Design? 3 2 Find the number of speakers needed Select the amplifier for the system (see chart below) (see charts on pages 18-20) (see page 21) You supply some basic pieces of information – type of application, dimensions of the area to be covered, ambient noise level, and ceiling height*.
EASY DESIGN GUIDE (cont.) EASY DESIGN TM TM 2 Determine the Number of Speakers Needed CS1EZ Ceiling Speaker SM1EZ Surface-Mount Ceiling Speaker CS1EZ SM1EZ Use this chart to determine the number of CS1EZ Ceiling Speakers and/or SM1EZ Surface-Mount Ceiling Speakers a particular installation will require, based on the dimensions of the area and the ceiling height.
EASY DESIGN GUIDE (cont.) TM Horn Loudspeakers (HS7EZ, HS15EZ, HS30EZ) The number in BLUE is the typical number of horn loudspeakers the installation requires. Additional speakers may be needed in areas that have obstructions, like shelving, that block sound dispersion. The number in RED is the minimum amplifier power needed (in watts) for the installation. Example: A factory has 35,000 square feet of open area and an average ambient noise level of 80 dB. Thus, it will require HS15EZ Horn Loudspeakers.
EASY DESIGN GUIDE (cont.) EASY DESIGN TM TM 2 Determine the Number of Speakers Needed (cont.) WB1EZ Wall Baffle Speaker Use this chart to determine the number of WB1EZ speakers a particular installation will require, based on the dimensions of the area. Wall Baffle Speaker (WB1EZ) • Obtain the length and width of the area. • Where the length and width of the area crisscross on the chart, you will find the typical number of speakers that the installation requires.
EASY DESIGN GUIDE (cont.) TM Once you determine the number of speakers and the minimum amplifier power for the installation, you are ready to select the system amplifier. A 70V paging amplifier is very easy to select. • Locate amplifiers on the chart on page 78 that have a wattage equal to or higher than the minimum amplifier power of your application. (Amplifiers with power capacities greater than this number will not damage the speakers. The extra power available is simply not used.
SELF-AMPLIFIED SYSTEMS SELF-AMPLIFIED (24V) SYSTEMS Bogen introduces the next generation in self-amplified (24V) paging equipment.
SELF-AMPLIFIED CEILING SPEAKERS Drop-In Ceiling Speakers Ceiling Speaker Assemblies These traditional style, recessed ceiling speakers are available with a fixed or detachable volume control knob.
SELF-AMPLIFIED SURFACE-MOUNT SPEAKERS SELF-AMPLIFIED SYSTEMS Easy Install® Ceiling Speakers ASM1 Bogen’s Self-Amplified Easy Install Speakers can be installed in a ceiling tile in less than a minute in any drop ceiling with standard ceiling tiles. Installation is a simple, three-step process that requires no tools. Simply pierce the ceiling tile with the specially-designed studs, use wing nuts to secure the speaker to the ceiling, and fasten wire nuts to make the 24V DC power and audio connections.
SELF-AMPLIFIED WALL BAFFLE SPEAKERS Wall Baffle Speakers SELF-AMPLIFIED SYSTEMS ASWB1 The ASWB1 Wall Baffle Speaker is an 8", cone-type loudspeaker, complete with a built-in amplifier and volume control, designed for telephone paging applications. It is engineered to provide excellent sound quality and trouble-free operation. Product Features: • Self-contained 1-watt amplifier • Simulated walnut finish with black grille cloth on front • Sloping front panel (13.
SELF-AMPLIFIED HORN SPEAKERS SELF-AMPLIFIED SYSTEMS High-Efficiency, Digital Switching, Horn Loudspeakers SAH5 (5W) , SAH15 (15W) , SAH30 (30W) Using digital switching amplifier technology, these Self-Amplified Horn Loudspeakers provide unprecedented low DC current draw and heat dissipation, allowing them to use fewer power supplies, run on longer cable runs, and work at higher ambient temperatures than conventional analog self-amplified horn speakers.
Determine Speaker Quantity Use the chart for the speaker you will use (SAH5, SAH15 or SAH30): 2. Locate the area's square footage. 3. Where these two measurements meet are two numbers. The number in GREEN is the number of speakers required. The number in RED is the number of Current Units (CU) needed for that many speakers. (You may need to increase the number of speakers in areas where large objects or shelving project into the coverage area, blocking sound.) SAH30 SAH15 SAH5 Current Units (min.
SELF-AMPLIFIED METAL HORN SPEAKERS SELF-AMPLIFIED SYSTEMS Traditional Metal Horn Speakers AH5A (5W) , AH15A (15W) The AH5A and AH15A Metal Horn Speakers are rugged, self-contained amplified paging horn assemblies that can be used for high noise paging areas indoors as well as for outdoor use. Their sturdy, weatherproof, all-metal construction allows them to withstand any environment while continuing to provide excellent audio intelligibility for paging and background music.
LEVEL CONTROLS Bypass Feature Buffer/Expander/Volume Control BUFEX Used with 24V systems, the BUFEX is a multi-purpose device that can work as a volume control for a network of speakers, and as a buffer that can drive up to 150 speakers. It also functions as a system expander when connecting to 100V, 70V, and 25V speaker systems. When the BUFEX’s Bypass feature is activated (by an external contact closure), it overrides the local level setting of the BUFEX and allows important messages to be heard.
POWER SUPPLIES POWER SUPPLIES Switch-Mode Power Supplies The SPS versions of power supplies use switching technology to provide large current capacities in very small packages. Unlike more conventional linear power supplies that use large and heavy transformers, switching supplies gate energy directly to the storage caps at the power supply output. This is a highly efficient way to convert voltages and because of this the power supplies generate very little heat.
SINGLE-ZONE TELEPHONE INTERFACE Single-Zone Universal Telephone Interface Bogen’s UTI1 is a single-zone telephone interface that is compatible with all standard analog port types. A background music (BGM) input with variable muting coordinates music and page announcements. An additional audio output provides a “page only” function (no BGM) for application flexibility. A built-in 24V DC, 1A power supply is provided for powering amplified speakers. Paging volume controls are provided for each of the outputs.
TELEPHONE INTERFACE PAGING CONTROL Telephone Access Module TAMB2 TAMB2PS The TAMB2 interfaces a telephone system with a paging system allowing announcements to be made through any telephone. Any of three types of analog ports can be connected using the TAMB2: loop start trunk, ground start trunk, and station port (90V ring up).
MULTI-ZONE TELEPHONE INTERFACE Override Zone Group Bogen’s UTI312 is a multi-zone paging controller with universal telephone interface. It is expandable from 3 to 12 zones in 3-zone increments using ZX3 expansion modules. Each zone has its own buffered paging output (150 speaker drive capacity) with volume control, a C-form relay contact and “zone active” indicator. Each module includes a pluggable 24V DC power distribution terminal strip and pluggable terminal strips for each zone for easy wiring.
PAGING CONTROL MODULES PAGING CONTROL PCM2000 PCMTIM Zone Paging System Telephone Interface Module The PCM2000 Zone Paging System provides robust zone paging for applications requiring 1 to 99 zones, and up to 32 paging zone groups. Its multi-function modules ensure flexibility and future expansion with minimum time and expense.
To Order a PCM2000 System, select from the following Modules: Time Tones*: PCMTIM Telephone Interface Module A universal interface connects to any type of telephone port, rapidly and trouble-free. Provides input for night ringer and emergency page override. One required per system.
PAGING CONTROL Zone Groups One unique feature of the ZPM3 is its ability to group together a number of zones and page in to them at the same time. However, the people you are trying to contact may spend their time in more than one zone area. By grouping zones, you increase your chance of contacting that person. An example of a typical 3-zone facility is a medium size location with an office area, manufacturing area, and warehouse. Each area is set up as an individual zone.
COMPACT AMPLIFIER SERIES CC-Series Compact Mixer-Amplifiers AMPLIFIERS The CC-Series consists of five compact mixer-amplifiers, each providing 40 watts of output power. The features available and number of inputs vary per model (see chart below). Each unit measures 2 rack spaces in height but only 8-1/4" wide, allowing 2 units to be placed side-by-side without requiring additional rack spaces.
AMPLIFIERS Signal-Processing Modules When signal-processing output modules are installed into the Power Vector's last two module bays, they automatically insert themselves into the mix bus signal path leading to the power amplifier stage. When two of these output modules are installed, their effects are cascaded with the second to last bay's module, processing the signal first and then passing it to the module in the last bay.
ADVANCED INPUT MODULES Input Modules (Output Modules on Page 40) LINE/MIC INPUTS - LMM1S, LMR1S Actively Balanced Emulated Transformer Inputs STEREO AUX INPUT - SAX1R Unbalanced Stereo Input • Gain/Trim control • Bass & Treble controls • Gate feature mutes lower priority modules • Mutable by higher priority modules • Variable ducking level when muted • Fade back from mute • Stereo-to-mono summing option • Bus assignable • RCA connectors LMM1S MONO AUX INPUT - MAX1R Unbalanced Mono Input • Gain/Trim contr
ADVANCED OUTPUT MODULES AMPLIFIERS Signal-Processing Output Modules (Input Modules on Page 39) Bogen’s plug-in signal-processing output modules automatically insert themselves into the mix bus signal path leading to the power amplifier stage when installed. (Shipping weight: 1 lb. each.
PUBLIC ADDRESS AMPLIFIERS Dual Band EQ Gold Seal Series Amplifiers The unique dual-function equalizer can be used for acoustic shaping or for feedback control. • Acoustic Shaping - Full range equalization is provided for correcting general frequency response issues that exist in the application venue. The full audio spectrum is covered on 1-octave centers with a boost/cut of 12 dB.
PUBLIC ADDRESS AMPLIFIERS AMPLIFIERS Classic Series Amplifiers C10, C20 C35, C60, C100 The Classic Series mixer amplifiers provide mixing of microphones, telephone, and auxiliary sources. Bogen’s Classic Series amplifiers offer high performance, flexibility, and reliability for most applications requiring a variety of inputs.
TELEPHONE PAGING AMPLIFIERS TPU250 Specialized Telephone Input TPU35B, TPU60B, TPU100B The TPU-Series’ 600-ohm transformer balanced input is perfectly suited to connect to paging ports and paging adapters such as Bogen’s TAMB2. Here are a few specially designed features: TPU100B shown TPU15A Bogen’s TPU-Series of amplifiers are the ideal choice within the telephone paging industry.
DUAL-CHANNEL POWER AMPLIFIERS Black Max™ Power Amplifiers AMPLIFIERS X300, X450, X600 Bogen's Black Max amplifiers are designed to provide maximum performance in constant voltage speaker systems. Dual 70V transformerless outputs deliver exceptionally clean audio to speaker systems requiring two channels of audio up to 600W per channel in a single package. High-efficiency class H amplifier design and the auto-sleep feature aid in reducing power consumption on continuously-powered systems.
DUAL-CHANNEL POWER AMPLIFIERS M-Class Amplifiers M300, M450, M600 Modular Amplifier Modes of Operation Each model includes a 3-position switch that can be set to one of three modes of operation: Stereo mode, 70V Mono mode, or Dual Mono mode.
AMPLIFIERS Heavy-Duty Operation MONO-CHANNEL POWER AMPLIFIERS The HTA line of amplifiers are designed to be workhorses. Large heat sinks and huge transformers allow these amplifiers to supply continuous, full (RMS) power to loads, even at high ambient temperatures. The HTA amplifiers are convection-cooled, so they provide the ultimate in set-andforget operation. More amazing than the heavy-duty capability of the HTA amplifiers is the quality of the output.
PRO-MATRIX AMPLIFIER What Does The Pro-Matrix Do? Digitally Matrixed Amplifier PM3180 Removable front panel for optional wall mounting The Pro-Matrix was developed expressly for the needs of restaurants, lounges, fitness centers, and other venues that require numerous input sources but have areas with distinctly different audio requirements. The Pro-Matrix amplifier provides 3 fully independent audio channels that can use any of the 6 different inputs in vastly different ways.
MIXERS Flexible Output Levels The VMIX was designed to make connections to other sound system components as easy as possible. Its transformerbalanced output provides ground loop isolation and high noise immunity when connected to other balanced inputs of downstream components.
MIXERS MIC/LINE Mixer The Bogen CAM8PRO is an 8-input, dual-bus MIC/Line mixer that combines superb performance with a generous array of simple-touse features in a single rack space design. It features 8 independently assignable inputs switchable between MIC and Line. Each input has a trim control, a switchable low cut filter, and a Main/Auxiliary bus output selector. Phantom Power can be universally applied to all MIC-selected inputs for condenser microphones.
MIXERS MIXERS Mixer/Pre-Amplifier CAM2 The CAM2 is a 5-input mixer/pre-amplifier suitable for a wide variety of applications, particularly for expanding the number of inputs on Bogen or other public address amplifiers. The CAM2 provides four professional, low-impedance, balanced microphone inputs through XLR connectors and one auxiliary input. Individual phantom power switches for each input allow the use of both dynamic and condenser microphones on the same unit.
AUDIO PROCESSOR CORE The Bogen CORE is a highly versatile digital mixer/processor designed for small to medium installations. Flexible hardware configurations, in blocks of 4: for 4 in/12 out, 8 in/8 out, etc. The CORE’s PC-based software allows for design, downloading, reversal of in-box designs, and live monitoring, calibration, and routing. Three system hardware configurations are available: CORE8X8 (8 inputs, 8 outputs), CORE4X12 ( 4 inputs, 12 outputs), and CORE12X4 (12 inputs, 4 outputs).
AMBIENT NOISE SENSOR SYSTEM PAGING ELECTRONICS ANS501 with Sensor Microphone Bogen's Ambient Noise Sensor System electronically adjusts the level of a page or background music in applications where ambient noise levels are continuously changing. The ANS501 ensures that page announcements or background music are intelligible even during periods of high ambient noise levels. The system includes a sensor microphone module (ANS500M) that monitors the ambient noise level, and a 12V DC power supply.
DIGITAL FEEDBACK ELIMINATION Digital Feedback Terminator The DFT120 eliminates the acoustical feedback loop created by the telephone handset and the paging speaker while providing highcapacity, high-quality recording and playback of audio pages.
DOOR PHONE TELEPHONE ELECTRONICS Analog Door Phone ADP1 Bogen’s ADP1 Door Phone provides convenient remote, hands-free two-way communication between two locations. Durable, weather-resistant, stainless steel construction protects against vandals and varying weather conditions. Product Features: Shown with bezel frame (included) Shown without bezel frame Connecting Amps to Other Equipment www.bogen.
DIGITAL SOUND PRESSURE LEVEL METER SPLM Product Features: • 1/2" Condenser microphone with removable windscreen • Large 2-1/8” LCD screen, 4-digit readout, auto backlight • Tripod fixed screw mount for field work • Light sensor • High accuracy: +/- 1.
AM/FM 35-WATT RECEIVER MUSIC & INPUT SOURCES Paging Input Details The DRZ35 has a full-featured microphone paging input. The microphone input is a low-impedance balanced input that works with dynamic or condenser microphones. Whenever a page is made, the AUX or Tuner feed is muted via a VOX detector. When the page is completed, the other source smoothly fades back in. By using a WMT1A matching transformer, the MIC input can be connected to the paging port of a telephone system.
CD PLAYER & AM/FM RECEIVER Space Saving CDR1 The CDR1 is a combination CD Player and AM/FM Receiver. Dual Outputs Product Features: Actual Display may • Single Disc CD Player & AM/FM Receiver differ in appearance from • Stereo & Mono signal out image shown here.
MICROPHONES MICROPHONES Bogen's microphone line includes a variety of types and styles (handheld, wireless handheld/lavaliere, desktop, gooseneck, boundary, and overhead hanging) to meet your application needs, from paging systems to instrument and vocal reproduction. These microphones provide clear, natural, intelligible sound reproduction with accurate response and dependable performance.
MICROPHONES HANDHELDS GOOSENECKS Condenser Gooseneck Microphone HDU250 GCU250 The HDU250 is a dynamic microphone that is ideal for acoustically demanding environments. It features a heavy zinc die cast case with a rigid, low noise cable-mount system and a lockable silent reed switch. 7" D x 2 " dia.; 13 oz.
MICROPHONES MICROPHONES & ACCESSORIES OVERHEAD BOUNDARY Professional Overhead Hanging Microphone Professional Boundary Microphone WCU250 SCU250 The overhead WCU250 is a back electret condenser, professional microphone perfectly suited for picking up audio from large groups. Because it can hang from the ceiling and is compact in size, the WCU250 is very useful in minimizing visual distraction for the performers and the audience alike, and limits intrusion into the working space.
INTERCOMS Targeted Communication Desktop Intercoms SI35A PI35A The SI35A and PI35A High-Powered Desktop Control Centers are dual-channel intercom and program distribution systems for applications with numerous locations, requiring maximum intelligibility of voice announcements and other sources.
VOICE REINFORCEMENT VOICE REINFORCEMENT Voice Reinforcement System COVER IN CLOSED POSITION ORATOR The Bogen Orator is a dual-channel, infrared (IR) wireless microphone/transmitter and mixeramplifier system that is designed to enhance a presenter’s voice in all areas of the room. IR technology eliminates the interference and cross-talk from adjacent rooms that occurs with FM-based wireless products.
SYSTEM DESIGN Actually, all you need to design a proper paging system is a few simple measurements. Then follow the stepby-step process to select the type and quantity of system components needed. At any point you can contact Bogen’s toll-free Technical Support Department for assistance, or take advantage of Bogen’s Free Application Design Service (see page 82).
SYSTEM DESIGN GUIDE PAGING SYSTEM TECHNOLOGY The aim of a paging system is to deliver important audio announcements, at the proper level and with sufficient clarity, to people working in a facility and to make those announcements easily understood. The two most common ways to accomplish this are to use either 70V centralized amplifiers with passive speakers or self-amplified speakers operating from a 24V DC power supply. Pages 64-67 explain 70V systems and pages 68-69 explain self-amplified systems.
WHAT MAKES A 70V SPEAKER? Step-Down Transformer Taps The primary side of the step-down transformer (the side that connects to the amplifier) has a number of connections (called taps or power taps) that can be used to select the peak power the speaker will consume from the amplifier. Why Taps? The selection of the power tap has an effect on both the amplifier power needed for the system and the volume of the speaker. The more power a speaker consumes, the louder the sound from the speaker.
SYSTEM DESIGN GUIDE AMPLIFIER INPUT TYPES Auxiliary Input (AUX) Microphone Input (MIC) The Auxiliary input is the most common type of input used in paging. This input is designed to connect to most music sources, such as a CD player or tuner. Usually the connector for such an input is a Phono jack (also called an RCA jack). It connects to other equipment using standard audio cables. The traditional paging amplifier input is the Microphone input.
DESIGNING 70V SYSTEMS CEILING SPEAKERS To determine the number of ceiling speakers your installation requires, simply divide the area’s total square footage by the speaker coverage as indicated in this chart. WALL BAFFLE SPEAKERS To determine the number of wall baffle speakers your installation requires, simply divide the area’s total square footage by 600 square feet.
WHAT IS A SELF-AMPLIFIED SYSTEM? SYSTEM DESIGN GUIDE Self-Amplified Paging Systems consist of: • Self-Amplified Speakers each contain an individual, built-in, miniature amplifier that drives the speaker directly. Each speaker requires 4 wires. Two wires supply the raw 24V DC voltage to power the speaker’s internal amplifier and another 2 wires supply the low-level audio paging signal to the amplifier’s input. All amplified speakers contain volume controls to adjust output level.
WHAT MAKES A SELF-AMPLIFIED SPEAKER? Built-In Amplifier Bogen’s latest line of self-amplified horns use a revolutionary digital switching amplifier. Unlike conventional analog amplifiers, this advanced technology produces very little heat when it operates. It produces so little heat that all it needs to dissipate the waste heat are the copper interconnecting traces on the printed circuit board instead of the typical large aluminum heat sinks.
SPEAKER LAYOUT SYSTEM DESIGN GUIDE The layout of the speakers should be planned before installation begins. The spacing of the speakers can be adjusted so that the speakers are evenly spaced in a row. Some adjustments may need to be made due to sound obstructions that may be in the area such as high shelving, cubicle walls, etc. Ceiling Speakers Ceiling Speaker Layout Layout starts in one corner of the area.
SPEAKER LAYOUT The layout of the speakers should be planned prior to installation. Because wall baffle speakers are designed to project forward, it is best to aim them in the same direction, as this provides for both greater coverage and clarity. You can use the building’s roof pillars or other available supports for mounting the wall baffles. In some cases, it may be necessary to mount the wall baffles on opposing walls. In these cases, the speakers will project sound in opposing directions.
SITE SURVEY SYSTEM DESIGN GUIDE Designing a system and determining an installation’s requirements are quite simple. After you set up your first system, the steps will appear logical and soon the process will become routine. However, before you begin designing or quoting a job you will need some basic information regarding the site and the end-user’s needs. Use the Site Survey Check List below to ensure that you collect all the information you will need to complete the design of the paging system.
SPEAKER WIRING Speaker Wiring Patterns NOT RECOMMENDED How you wire a speaker system may require some tradeoffs. The simplest way is to parallel all the speakers on one very long run of wire. This approach leads to some problems. First, the amount of power lost in a long run of wire may not allow the required amount of 70V speaker signal, or 24V DC voltage for selfamplified paging systems, to get to the farthest speakers.
SYSTEM DESIGN GUIDE WIRE TYPES Speaker Wire UTP The speaker wire best suited for paging systems is 2 conductors in a jacket. The gauge of the conductors varies depending on the installation. In many instances, a shielded version of the speaker wire is used. The shield can be useful to help protect the conductors from receiving electrical interference from other electrical equipment in the area.
WIRE-RELATED LOSSES There are different charts for centralized and self-amplified speakers to determine the maximum cable lengths that Wire Loss In Central Amplifier Systems Self-amplified systems are particularly sensitive to losses in the wire, especially the amount of supply voltage that is lost in the wires on the way to the self-amplified speaker. When the drop in the wiring becomes too large, the speakers may begin to distort or stop functioning altogether.
TELEPHONE INTERFACES www.bogen.com SYSTEM DESIGN GUIDE The most common way to make announcements over a paging system is through the telephone system. It is a convenient and readily available live input source. However, audio and telephone technologies are different. This sometimes makes it necessary to use an adapter to link the two systems together. 76 There are many types of telephone ports possible in telephone switches.
SOUND PRESSURE LEVELS CHART Typical Ambient Noise Level Typical Environments Very High Noise 85-95 dB Speech Almost Impossible To Hear Construction Site Loud Machine Shop Noisy Manufacturing Printing Shop 85 dB High Noise 75-85 dB Speech is Difficult To Hear Assembly Line Crowded Bus/Transit Waiting Area Machine Shop Shipping/Warehouse Supermarket (Peak Time) Very Noisy Restaurant/Bar SYSTEM DESIGN GUIDE 95 dB 75 dB Medium Noise 65-75 dB Must Raise Voice to be Heard Bank/Public Area Departm
78 www.bogen.
AMPLIFIER CHART www.bogen.
PRODUCT ACCESSORIES 80 AMPLIFIERS MOUNTING / RIGGING KITS www.bogen.com PRODUCT ACCESSORIES Model # Accessory Description Associated Model(s) Dimensions Prod. Page # Wt. GSRVC Remote Volume Control Gold Seal Series Amps 2-3/4" W x 4-1/2" H x 1-3/8" D 2 oz. GSTRC Gold Seal Series Security Cover Gold Seal Series Amps 14-3/4" W x 3-1/2" H x 1" D 5 oz. 41 MA3 Module Adapter D-Series, WMA, DPA Amps Works with advanced modules 1 lb.
CORE AUDIO PROCESSOR Accessory Description Associated Model(s) Dimensions 2518 2520 Prod. Page # Wt. 18-Gauge Connector PI35A/SI35A 5/8" W x 1/4" H x 3/4" D 2 oz./30 61 20-Gauge Connector PI35A/SI35A 5/8" W x 1/4" H x 3/4" D 2 oz./30 61 2522 22-Gauge Connector PI35A/SI35A 5/8" W x 1/4" H x 3/4" D 2 oz./30 61 CA10A Call-In Switch PI35A/SI35A 2-3/4" W x 4-1/2" H x 2" D 2 oz. 61 CA11A Call Privacy Switch PI35A/SI35A 2-3/4" W x 4-1/2" H x 1-3/4" D 2 oz.
FREE APPLICATION DESIGN SERVICE FREE APPLICATION DESIGN SERVICE Bogen’s Application Design Service was created to assist with the design of paging systems for any and every project encountered. It’s fast, comprehensive, and FREE. So let us design it for you! The Application Design Service provides: • Speaker Placement Design • Complete Bill of Material – This includes product description, model number, and quantity. We can even fax it to the distributor of your choice for pricing, if you wish.
CATEGORY INDEX Speakers, Ceiling . . . . . . . . . . . . . . . . . . . 2, 6-9, 11, 15-16 Speakers, Ceiling, Self-Amplified (24V) . . . . . . . . . . 23-24 Speakers, Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Speakers, Drop-In Ceiling . . . . . . . . . . . . . . . . . . . . . . 8-9 Speakers, Drop-In Ceiling, Self-Amplified (24V) . . . . . . .23 Speakers, Easy Design . . . . . . . . . . . . . . . . . . . . . . .15-16 Speakers, Easy Install . . . . . . . . . . . . . . . . . . . . . .
www.bogen.com INDEX MODEL INDEX 84 108-2120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 108-2150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 109-2140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 109-2151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 2518/2520/2522 . . . . . . . . . . . . . . . . . . . . . . . . .61, 81 A2/T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ABOUT BOGEN TABLE OF CONTENTS } Speakers & Accessories . . . . . . . . . . . . . . . pages 1–14 } Easy Design/Easy Install Speakers . . . . . pages 15–21 } Paging & Telephone Electronics } Self-Amplified (24V) Systems } Music & Input Sources, Microphones . . . pages 55–60 . . . . . . . . . pages 22–29 . . . . . . . pages 52–54 } Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . page 30 } Office Communications . . . . . . . . . . . . . . .
Specifications are subject to change without notice. New Jersey • Tennessee • Florida 1-800-999-2809 www.bogen.com PRODUCT CATALOG 109 54-9215-01J 1409 © 2014 Bogen Communications, Inc. . O F.P. BOGEN COMMUNICATIONS, INC. INSTALLATION CASE STUDIES Bogen products have been used in numerous types of applications, each with its own unique requirements. Whether simple or sophisticated, installations around the world benefit from Bogen products.
