Specifications

9
Ventilation
The amplifier is passively cooled so care must be taken to make cool air available to the amplifier. Do not operate
this amplifier in environments that get hotter than 100 deg. F. If the amplifier is to be free standing, do not remove
the feet on the amp since they provide a space on the bottom of the amp for cooling air intake. Likewise do
not slide books or papers under the amp which will reduce the intake area for the cooling air. Be certain not
to place anything on top of the amp which will block the top ventilation slots. Keep anything mounted above the
amplifier at least 1.75 inches away.
Cooling
Rack Mount Adapter
A rack mount adapter (model RPK93) is available to allow mounting of either a single amplifier or two amplifiers
side by side. The amplifier and rack mount adapter use 2 rack spaces (2RU) of height.
NOTE: One (1) rack space both above and below the amplifier will also be needed to ensure proper ventillation.
Accessories