Installation Guide

4
Mounting The Striker To The Gate Upright
a.) Align the striker along the edge of the gate upright,
in the closed position with the latch. Mark the two
holes on the front of the striker (Fig. 4).
b.) Mark the third hole on the side of the striker, and
pre-drill all three holes of the striker using a
3
⁄
3
⁄
3
32
⁄32⁄
" drill
bit (Fig 5.)
c.) Secure striker to gate using three 1" screws (Fig. 6).
2
Fig. 4
Fig. 6
Fig. 5
Mark
and
Pre-drill