Installation Guide

3
Drill 3/32"
Drill 3/32"
Drill 3/32"
Drill 3/32"
Drill 3/32"
TemplateTemplate
Post
Post
Drill 5/8"
Drill 5/8"
Drill 3/32"
Drill 3/32"
Drill 3/32"
Drill 3/32"
Drill 3/32"
Fig. 1
Fig. 2
Fig. 3
Mounting The Latch To The Post
a.) Once hinges are installed and gate is aligned, place
the latch template at desired height at the edge of
the post closest to the gate. Mark and pre-drill holes
using a
5
⁄
5
⁄
5
8
⁄8⁄
" drill bit for the center screw hole and
using a
3
⁄
3
⁄
3
32
⁄32⁄
" drill bit for the top and bottom screw
holes (Fig. 1).
b.) Align the latch to the pre-drilled holes and secure to
post using two 1" screws (Fig. 2 & 3).
1
Post
Post
Latch
Latch