Installation Guide

(Step 1 Continued)

g.) Using two 25mm round head Phillips machine

screws, secure rear handle to the two threaded

corner prongs of the front handle (Fig. 6).

h.) Snap on rear handle cover (Fig. 7)

Fig. 6

Fig. 7

Fig. 9

Fig. 11

25mm

Screws

Rear

Handle

Mounting The Catch To The Post

a.) Slide the catch onto the catch bracket (Fig. 8).

b.) Align the catch at the correct height along post to

engage with the front handle striker (Fig. 9).

c.) While holding the catch bracket in place, mark the

center of the two slotted holes on the inside of the

post (Fig. 10).

d.) Slide the catch off of the bracket and mark the

center of the slotted hole on the front of the post

(Fig. 11).

Fig. 8

CatchCatch

Bracket

Fig. 10

Inside

of Postof Post