Instruction Manual

5
4. Operation
4.1 Controls and Displays (see figure 1).
The Power Switch: controls power to the unit and is located on the rear of the
oven nearest the power cord.
The Carousel Switch: starts/stops rotation of Carousel for loading and
unloading of tubes.
The Display shows the chamber temperature in ˚C during normal operation. It
displays the set temperature when the set button “F” is pressed.
Function switch “F” – Pressing the “F” button enters the “Function Select
Mode”
Set Switch “S” – Pressing the “S” button enters the “Set Mode” to set
temperatures or accept menu changes.
Increment / Decrement Dial: Turning the dial counter clockwise will decrease
the display setting and turning the dial clockwise will increase the display setting.
Carousel Indicator: The indicator will illuminate GREEN when the carousel is
turning.
Heat Indicator: The indicator will illuminate RED when the heating element is
powered on and heating the chamber.
Figure 1