Variable Speed Nutating Mixer Model 201100 Operating Instructions N2400338, 03/2012, Rev.
Contents 1 Safety.......................................................................................3 2 General Information...............................................................4 3 Getting Started........................................................................5 4 Operation of the Tube Rotator……………….........................6 5 Specifications.........................................................................7 6 Warranty and Service.........................................
1. Safety The following symbols mean:Caution: Read these operating instructions fully before use and pay particular attention to sections containing this symbol Always observe the following safety precautions Use only as specified by the operating instructions, or the intrinsic protection may be impaired. After transport or storage in humid conditions, dry out the unit before connecting it to the supply voltage.
2. General Information The Boekel Scientific Variable Speed Nutating Mixer is designed to provide a gentle, low-foam mixing motion for uniform mixing of fluids in small collection tubes to larger centrifuge tubes. The speed is adjustable from 4-24 rpms and the mixing is achieved through the combination of orbital and rocking motion of the tray. This device can be used in/for: o o o o o N2400338, 03/2012, Rev.
3. Getting Started 3.1 Unpacking Remove packing materials carefully, and retain for future shipment or storage of the unit. 3.2 The Boekel Scientific Variable Speed Nutating mixer includes: ●Variable Speed Mixer…….…………………...............................1 piece ●External AC Adapter…..............................................................1 piece ●Dimpled mat………………… ….……………………......…….….1 piece ●Warranty Card……….…………………………………………......1 copy ●Operating Instructions…………………………………………......
4. Operation Control Panel 4.1 Connect the Variable Speed Nutating Mixer to the AC/DC adapter and the adapter to the main power supply and the power cord to power supply outlet. 4.11 Place the Variable Speed Nutating Mixer on an appropriate flat surface such as a bench top. Be sure to provide adequate clearance around the unit to allow the tray to move freely through its motion. Note: The Variable Speed Nutating Mixer can be placed in a cold room or in an incubator up to a maximum temperature of 40°C.
5. Specifications • The Boekel Scientific Variable Speed Nutating Mixer provides: o o o o o Digital Microprocessor Control. Cold Room and incubator compatibility. Adjustable speed provides gentle or vigorous mixing action. AC Adapter is UL, CSA, and CE approved 2 Year warranty • Speed range ………………….…………...........…........................................Variable 4 to 24 rpm • Mixing Angle ………………….................................................................................
6. Warranty and Service 6.1 Warranty When used in laboratory conditions and according to these operating instructions, Boekel warrants this product to be free of defective material and workmanship for a period of two years from the date of manufacture. The liability of Boekel for any defective equipment during the warranty period shall be limited to the repair of such equipment or replacement thereof without charge for parts or labor.
