User's Manual

When moving the unit from a low temperature place to a high tem-
perature place, water steam will be condensed, do not utilize in this
case, otherwise it may cause fire, electric shock or other hazards.
20.
Please clean with dry cloth.
Please remove the power cord before cleaning, do not utilize liquid
cleanser or aerosol to clean this unit. Please utilize dry cloth when
cleaning.
21.Ventilation opening
Please do not block any open ventilation hole. Please install the unit
according to manufacturer's instruction. Both opening and ventila-
tion holes in the unit casing are designed for ventilation. Do not plug
these opening and ventilation holes. Insufficient ventilation may
lead to overheating and may shorten the service life of the unit.
Please do not place the unit on bed, sofa, carpet or other similar
surface, because this will
block the heat emission opening. This product design does not sup-
port embedded installation,
unless there is adequate ventilation space or permitted in the
manual by manufacturer, please
do not install the unit in confined space, such as bookcases, shelf,
etc.
22.Heat source
Do not install the unit near heat source such as heater, stove or
other heating equipment
(including efficacy).
23.Screen protection
The LCD screen is made of glass.
Therefore, the screen may be broken when the unit falls or it is com-
pressed by other objects. Be careful to avoid damage when the
screen is broken.