User Manual
Table Of Contents
- Safety Instructions
- Printer installation
- Using your ID Card printer
- Choosing the right dye-film
- Choosing the right cards
- The Printer driver SETTINGS
- Caring for your printer
- CLEANING IS EASY AND INEXPENSIVE
- THE CLEANING ‘SYSTEM’
- Cleaning Roller Kit (5 sleeves, 1 roller bar) - Part number - 3633-0054
- Available consumables
- Troubleshooting
ID Card Printer – User Manual
- 24 -
Replacing the Cleaning Roller
A new cleaning roller is supplied with every new Dye-Film roll.
–
Open the Printer, remove the used Dye-Film
,
then :-
1. Pull out the Cleaning Cassette.
(This is the positioned towards the front of the Printer – just behind the front
Card slot – see below).
2. Slide out the metal bar, then remove and discard the used
Cleaning Roller.
3. Slide the metal bar into the new Cleaning Roller.
A
2
4. Pull the tab (A) to carefully remove the Cleaning Roller’s
protective cover. This will reveal the Roller’s “tacky” surface.
5. Place the new Cleaning Roller into the Cleaning Cassette,
and refit the Cleaning Cassette into the Printer.
1
2
3
4
5