User Manual
Table Of Contents
- Safety Instructions
- Printer installation
- Using your ID Card printer
- Choosing the right dye-film
- Choosing the right cards
- The Printer driver SETTINGS
- Caring for your printer
- CLEANING IS EASY AND INEXPENSIVE
- THE CLEANING ‘SYSTEM’
- Cleaning Roller Kit (5 sleeves, 1 roller bar) - Part number - 3633-0054
- Available consumables
- Troubleshooting
ID Card Printer – User Manual
- 20 -
Rewriteable Cards use a special heat sensitive
layer on the upper surface that can be erased and
rewritten (at least 500 times).
These Cards are not printed in the conventional
sense (where Dye-Film is used), but instead use
heat transferred directly from the Thermal
Printhead into the card surface.
Should you need to make changes within the Driver, please see “The Printer
Driver Settings” on page 21.
Using Rewriteable Cards
ReWriteable
Heat sensitive layer with
embedded dye and developer.
PVC or PET substrate
PVC layer for full quality colour/Monochrome printing.
To print on rewriteable cards:
1. Remove the Dye-Film from the printer.
2. Close the lid.
3. Ensure the “Colour Format” (Driver Preferences) is set to “Monochrome (K Only).
4. On your PC, click ‘Print’ in your printing application.
5. Insert a rewritable card in the card feed slot with the mat surface of the card
facing up.