Installation Manual

Chapter 4. Design 99
© 2018 Bodno
Before Print Card - Count the number of cards you're going to print and
update the counter before each card is printed.
After Print Card - Count the number of cards you printed and update the
counter after printing each card.
And set the following properties:
Save with Document - Save the settings and counters with the document so
you don't lose any data.
Minimum Value - Defines the counter minimum value in case of negative
incrementation.
Maximum Value - Defines the counter maximum value in case of positive
incrementation.
Restart Value - Is the value assumed by the counter when it reaches the
maximum or minimum values. (Min Value < Restart Value < Max Value)
Increment Value - Defines the incrementation value, it can be positive or
negative.
Current Value - Shows the current value.
Justified with Zeros - Justify with zeros until the desired number of digits.
Number of Digits - Defines the number of digits used in the counter, you
can justify with zeros.
Font Auto Adjust - Automatically adjust the font size, but only if font point
size is set to auto.
Concatenation - Allows you to add a prefix or suffix to your counter value. If
you don't want these to be printed check the Ignore on print check box.