Installation Manual

Bodno Manual94
© 2018 Bodno
4.4.9 - Image
You can acquire images from any source available; from disk, from a
database, from a camera or even from a scanner.
After you select an image and apply it to your working area, you have
access to a new tab, the image tab. On this tab you can change a set of
properties as:
Keep Ratio: Allows you to adapt the image to your object boundaries or
keep the image ratio.
Reinforce Black: This option forces the usage of Resin K on the black in
the image.
Flip Horizontal: This option reverses the active object horizontally, that is,
from left to right. It leaves the dimensions of the object and the pixel information
unchanged. It looks as if the image has been reflected along the central vertical
axis of the object.
Flip Vertical: This option reverses the active object vertically, that is, from
top to bottom. It leaves the dimensions of the object and the pixel information
unchanged. It looks as if the image has been reflected along the central
horizontal axis of the object.
Grayscale: Applies grayscale on the image in which the value of each pixel
is a single sample, that is, it carries only intensity information. Images of this