Installation Manual
Table Of Contents
- Chapter 1. About Bodno
- Chapter 2. Installation and Support
- Chapter 3. Getting Started
- Chapter 4. Design
- 4.1 - Workspace
- 4.2 - Document Properties
- 4.3 - Document Objects
- 4.4 - Object Properties
- Chapter 5. Database
- Chapter 6. Printing
- Chapter 7. Encoding
- Chapter 8. Users
- Appendix A - DIAMOND Net License
- Appendix B - Advanced Print Operations
- Appendix C - Encoding
- Appendix D - Barcodes
- Appendix E - Link Image to DB Field
Bodno Manual86
© 2018 Bodno
4.4.5 - Outline
Outline allows you to chose between five different types of predefined lines
and a custom one.
Solid Line: Is a plain line.
Dash Line: Dashes separated by a few pixels.
Dot Line: Dots separated by a few pixels.
DashDot Line: Alternate dots and dashes.
DashDotDot LIne: One dash, two dots, one dash, two dots.
The Custom Line is a line that you can define as you wish and if click on
the advance button besides the normal advanced parameters you are allowed to
set offset and pattern parameters.
Line width is one of the settings that you can change from 0.1mm to 10mm