Installation Manual
Table Of Contents
- Chapter 1. About Bodno
- Chapter 2. Installation and Support
- Chapter 3. Getting Started
- Chapter 4. Design
- 4.1 - Workspace
- 4.2 - Document Properties
- 4.3 - Document Objects
- 4.4 - Object Properties
- Chapter 5. Database
- Chapter 6. Printing
- Chapter 7. Encoding
- Chapter 8. Users
- Appendix A - DIAMOND Net License
- Appendix B - Advanced Print Operations
- Appendix C - Encoding
- Appendix D - Barcodes
- Appendix E - Link Image to DB Field
Bodno Manual36
© 2018 Bodno
3.5.1 - Create from Existing Model
This topic guides you on how to create a new document using an existing
model. You can start a creation procedure by clicking on the create button on
the "Welcome View".
'Welcome View' 'Click Create'
Or 'Click File' menu 'New' (CTRL+ N)
Then choose the type of model you want. The model types are organized in
5 groups:
Basic - have no contacts, no microprocessors or internal memory. Simple
piece of plastic that you can print on front and back side.
Common - are the most common types of card models, used by the vast
majority of users.
Magnetic - this model type allows you to encode the magnetic stripe through
Bodno. This means that you can print and encode your card at the same time
or use an external encoder. These cards may contain secondary technology,
like RFID technology.
Contactless - any pocket-sized card with embedded integrated circuits that
can process and store data, and communicate with a terminal via radio waves.
This type of card model allows you to encode through Bodno. By using
JavaScript language, you can program your card and perform the read and
write operation on the card. This also means that you can print and encode your
card at the same time or use an external encoder.