Installation Manual
Table Of Contents
- Chapter 1. About Bodno
- Chapter 2. Installation and Support
- Chapter 3. Getting Started
- Chapter 4. Design
- 4.1 - Workspace
- 4.2 - Document Properties
- 4.3 - Document Objects
- 4.4 - Object Properties
- Chapter 5. Database
- Chapter 6. Printing
- Chapter 7. Encoding
- Chapter 8. Users
- Appendix A - DIAMOND Net License
- Appendix B - Advanced Print Operations
- Appendix C - Encoding
- Appendix D - Barcodes
- Appendix E - Link Image to DB Field
Bodno Manual210
© 2018 Bodno
Appendix B.1.4 - IDP SMART 50 Overlay Settings
The way the IDP Smart 50 printer works with Overlay requires the following
configuration:
The RGB value of objects in a “user defined mask” is the factor that SMART
uses to distinguish which panel is used.
R value is for the Overlay (O) panel
G value is for the printing (YMCK) panel
B value is for Fluorescent (F) panel.
Value “0” means ‘activated’ and value “255” means 'deactivated'.
Examples:
- Blue = RGB(0, 0, 255) : printing and Overlay
- Pink = RGB (255, 0, 255) : printing only
- Black = RGB(0, 0, 0) : printing, Overlay and UV printing
- Red = RGB (255, 0, 0) : printing and UV printing
Appendix B.2 - Web Print Server
The Web Print Server alllows you to remotely print cards from a computer
that doesn't have Bodno installed.
To use the WebPrint Server you are required to:
1 - Have a computer with Bodno DIAMOND Edition connected to a working
local area network (LAN or Internet) to act as the Web Print Server.
2 - Have another computer (Client Computer) connected and to the same local
area network (LAN or Internet).