Installation Manual

Bodno Manual180
© 2018 Bodno
7.5.2 - Printer Tools
Printer Tools are a powerful set of tools that allow you to manually navigate
your card inside your printer (in printers that support these functions) so you
have more control over how your printer uses your card while writing your
Encode Operations.
The available printer tools vary with the printer modules installed on your printer.
You can find the Printer Tools tab by clicking the Encode View button, or
clicking View > Encode View and clicking the Printer Tools tab on the
right.
Insert card from card input feeder inserts a card positioned in the printer
input feeder into the printer circuit.
Insert card manually allows you to manually insert the card directly in the
position you desire.
Position card at contact encoding unit moves the card from its current
position to the contact encoding unit.
Position card at contactless encoding unit moves the card from its current
position to the contactless encoding unit.
Move card out of contactless encoding unit moves the card out of the
contactless encoding unit.
Eject card to dispenser unit moves the card from it's current position to the
card dispenser unit.
Eject card to reject unit moves the card from it's current position to the card
dispenser unit.
Magnetic Encoder allows you to read the content the 3 tracks of a magnetic
card.
Direct Commands allows you to send commands directly to the printers who
support this feature (please refer to the printer manufacturer for a list of
supported commands).