Installation Manual
Table Of Contents
- Chapter 1. About Bodno
- Chapter 2. Installation and Support
- Chapter 3. Getting Started
- Chapter 4. Design
- 4.1 - Workspace
- 4.2 - Document Properties
- 4.3 - Document Objects
- 4.4 - Object Properties
- Chapter 5. Database
- Chapter 6. Printing
- Chapter 7. Encoding
- Chapter 8. Users
- Appendix A - DIAMOND Net License
- Appendix B - Advanced Print Operations
- Appendix C - Encoding
- Appendix D - Barcodes
- Appendix E - Link Image to DB Field
Chapter 6. Printing 171
© 2018 Bodno
Rotate 180, Rotates the layout by 180º when sending the print job.
Flip Horizontal, Flips the layout horizontally when sending the print job.
Flip Vertical, Flips the layout vertically when sending the print job.
Use Colored Card, Sends the print job optimized for when your card is other
than white.
You can select from Black, Green and Yellow.
Print Jobs, By default the print job is sent as "All Print operations", in this
case Bodno sends all print jobs whether each print job was successful or not.
With Card by Card option Bodno only sends the next card to be printed, after
receiving a success signal from the printer.
With Card by Card and Wait option Bodno sends the print job one by one,
and waits for a user input. Bodno will wait for a user confirmation that each
selected print job is successful before sending the next print job.
Overlay/Varnish:
Mode: By default the Overlay is Disabled. Depending on the Printer in use it is
possible to send the Overlay Layout during the print job to the driver by saving it
to an External file or directly to the printer as Separate Page.