Installation Manual

Bodno Manual124
© 2018 Bodno
Color Balance - Is the global adjustment of the intensities of the colors
(typically red, green, and blue primary colors or RGB system). Changing the
overall mixture of colors in an image and is used for color correction and when
you drag any of the sliders, you can see those corrections taking place,
adjustments are made to the color values RGB (on screen) or CMY (on
printers). The values can go from -128 to 128.
Color to Grey - Apply gray scale on the image in which the value of each
pixel is a single sample, that is, it carries only intensity information. Images of
this sort, are composed exclusively of shades of gray, varying from black at the
weakest intensity to white at the strongest.
Color to Monochrome - Not a combination of black and white in a
continuum producing a range of shades of gray, but really starkly contrasted
black and white.
Zoom In - This tool allows you to obtain a larger image, or a closer view.
Zoom Out - This tool allows you to obtain a smaller image, or a farther view.
Zoom Auto - Reset image to its initial size.
Export Image - You can save the image as... in many different formats like
png, jpg, bmp, tiff and others.
Select Image Acquisition Source - Allows you to select the image
acquisition source from any device that is connected or installed on your pc. It
may appear some devices that are not connected but are installed.
Image Acquisition - This tools opens the interface related with the image
acquisition source you had chosen.
Open Image File - Opens an image file from your system, including disk,
USB key, memory card or any other source.
Select Image File Path - Allows you to chose your default image file path
from all that you had already used before on your document.
Face Detection
Face Detection Setup
Undo - It erases the last change done to the document reverting it to an
older state.