Installation Manual

Bodno Manual122
© 2018 Bodno
Updated - Your object is updated in five different situations:
When Item Double-Clicked - When you double-click on the object it will
open the interface related to the source you have chosen.
When Load Document - Every time you open the card document.
Before Print - Before the printing procedure it will open the interface related
to the source you have chosen.
Before Print Card - Before each time a card is printed it will open the
interface related to the source you have chosen.
After Print Card - After printing each card it will open the interface related
to the source you have chosen.
Save with Document - Save the signature image with document so you
don't lose any data, but on the other hand, if you don't want to keep the image
for a smaller card document just chose 'No'.
Format - The image can have a pre-established format, like shown on the
image above, adapting the image to it or a free format, allowing you to keep the
image source format.