Installation Manual
Table Of Contents
- Chapter 1. About Bodno
- Chapter 2. Installation and Support
- Chapter 3. Getting Started
- Chapter 4. Design
- 4.1 - Workspace
- 4.2 - Document Properties
- 4.3 - Document Objects
- 4.4 - Object Properties
- Chapter 5. Database
- Chapter 6. Printing
- Chapter 7. Encoding
- Chapter 8. Users
- Appendix A - DIAMOND Net License
- Appendix B - Advanced Print Operations
- Appendix C - Encoding
- Appendix D - Barcodes
- Appendix E - Link Image to DB Field
Chapter 4. Design 119
© 2018 Bodno
Before Print Card - Before each time a card is printed it will open the
interface related to the source you have chosen.
After Print Card - After printing each card it will open the interface related
to the source you have chosen.
Save with Document - Save the image with the document so you don't lose
any data, but on the other hand, if you don't want to keep the image for a
smaller card document just chose 'No'.
Format - The image can have a pre-established format, like shown on the
image above, adapting the image to it or a free format, allowing you to keep the
image source format.
Face Detection - When you chose yes, after the image as been acquired
the image editor opens, allowing you to chose the face detection option.
Open Image Editor - You can open the editor every time the image is
updated (yes), never open the editor (no), or open the editor only when an error
is detected (Only when error).
4.4.10.2.2 4.4.10.2.2 - From Camera or Scanner
After you add an image to your card, the first thing that opens is the image
editor, but you can change your image source any time you want and a camera
or scanner is one of your options.