Installation Manual

Bodno Manual102
© 2018 Bodno
Title - You can give a name to your object, it will make it easier for further
identification.
You can update the object in six different situations.
When Item Clicked - When you double-click on top of the object it will open
an input window to update.
On EditView - This setting, when chosen, allows you add a new field to a
small internal database, as you'll see further on this manual.
When Load Document - When the card document is loaded this object is
updated.
Before Print - After the print order and before start printing, it will open an
input data window in order to allow you to update the object, after that it will not
be update again until next print order, on the example below was date field.
Before Print Card - Before print each card, it will open an input data
window in order to allow you to update the object, on the example below was
date field.
After Print Card - After print each card, it will open an input window in
order to allow you to update the object for the next card, on the example below
was date field.