Installation Manual

Chapter 4. Design 101
© 2018 Bodno
Before Print - Update the counter before the printing procedure starts and
all the cards are printed with the same date and time.
Before Print Card - Update date and time before printing each card.
And set the following properties:
Save with Document - Save the settings and date/time of the last printing
procedure with the document so you don't lose any data.
Format - You can format the date using one of the preset formats available
thru the drop down menu or by creating your own format by clicking on the
pointed button and then write it according with the legend below.
Font Auto Adjust - Automatically adjust the font size, but only if font point
size is auto.
Concatenation - Allows you to add a prefix or a suffix to your date and it
can be printable, to do that just check on the check-box.
4.4.10.1.3 4.4.10.1.3 - Keyboard Input
This setting allows you add an object to your card that is updated by
keyboard input. It can be updated automatically, saved with your card file. You
can also choose the data type like explained further on this manual.
When a text object is selected, you can go to the Source Tab and on the
dropdown menu, on top, chose Keyboard Input option.