Application Guide

COLOR

TOUCHSCREEN

LCD UPDATE AND CALIBRATION WIZARDS

FOR WINDOWS

From your computer, you can access two wizards to help you out in the event of a problem with the

calibration of your touchscreen and update your screen firmware and graphic resources if required.

These two wizards can be accessed from the Evolis Print Center

in the Tools tab or directly from the

Programs folder, then go to Evolis Card Printer, click on Evolis Premium Suite

, then on Tools.

(LCD) SCREEN SETTINGS WIZARD

Follow the wizard step by step to configure the touchscreen. You have two buttons (touch target) to tap

on your touchscreen to readjust its settings.

When the wizard has been launched,

thescreen above appears.

First touch the flashing target at the top left.

Your touch details appear.

Then touch again at the bottom right, in the

same way the information is provided.

Your configuration is complete.

LCD UPDATE WIZARD

The wizard will help you to update your screen. You have the option to carry out two types of update:

• Screen firmware update

• Screen graphic resources update

Before starting, you should download the firmware update file and the graphic resources file for the screen

from the www.evolis.com website

1. Go to Support and Drivers, then select the Primacy printer model.

2. Under Drivers and Firmware, click the file for the corresponding firmware or the file for the graphic

resources.

3. Accept the download then save the file in a directory on your hard drive.

If you wish to do two updates, you should run the LCD update wizard twice.

The operation may take a few minutes. If the printer is not showing the Ready status, this means that the

update has not been carried out correctly or, possibly, that your printer is not working properly. Check

the connection cables and run a new update.

However, if you experience problems while updating the firmware or graphic resources, please contact

your Evolis reseller, who can provide new installation files.

Never interrupt the transfer between the computer and printer during the download phase

(powering off the printer or computer, unplugging a cable).