Manualshelf

Application Guide

ManualsBrandsBodno ManualsOffice ElectronicsEvolis Primacy Dual Sided ID Card Printer & Complete Supplies Package with Bronze Edition ID Software
11121314151617181920
COLOR
TOUCHSCREEN
17
PRINTER STANDBY MODE SETTINGS
You can set the printer standby mode from the screen:
Standby mode
Hibernation mode
Standby Mode
Your printer remains active in a mode with intermediate power consumption and the touchscreen has
reduced brightness. It will automatically restart when printing is launched or by touching the touchscreen.
Standby mode can be configured with the – and + buttons, and will be triggered after 10 minutes by default.
Hibernation Mode
Hibernation mode considerably reduces the power consumption of your printer. Evolis advises you to
always activate this mode in order to help protect our environment. The next time you print, you should
press the ON/OFF control button on the printer (short press) to reactivate the printer.
Hibernation mode can be configured with the – and + buttons, and will be triggered after 30 minutes by
default.
You can deactivate either both modes at the same time or activate only the standby mode.