Operation Manual

1514
EYE REFRESH™ EYE REFRESH™
SWITCHINGON
1. Press and hold the power button to turn the unit on.
Note: The unit should be fully charged before use.
2. The mode light will flash blue.
3. Eye Refresh is ready to use when the blue light is on continuously.
4. Choose your treatment (see pages 20-27).
Important: Both sides work at the same time. The thermotherapy side warms up and the
cryotherapy side remains cool.
The unit will take approximately 60 seconds to reach optimum temperature. This will
however, depend on the ambient room temperature.
Note: The unit will automatically turn off after 12 minutes.
5. Turn off the unit by pressing and holding the power button.
6. After use, clean the head of the unit with a damp tissue.
IMPORTANT
Have everything ready. Eye Refresh only operates for a maximum treatment period of 12
minutes. Eye Refresh needs to be left for 60 minutes between treatments for the treatment
head to return to room temperature.
Repeated use within a 60 minute period will significantly reduce the cooling effect.
The Dezac Group Ltd 2013