Use and Care Manual

GLASS TILE STUDIO

Use, Care and Maintenance

Movement Joints

Movement joints are gaps in the installation that are necessary to allow the walls and substrate to move and shift. Usually

these voids or gaps between the tiles are lled with a soft pliable material such as silicone. Often they are used where there

is ‘a change of plane’, which really means when a wall meets another wall such as a corner, or where countertop meets

the back splash. An Architect, designer or professional installer should be consulted in regards to size and amount of

movement joint s required.

For best results it is important to adhere to the guidelines set out by the TCNA (Tile Council of North America) regarding

Movement Joints EJ171 in the current edition of the “TCNA Handbook for Ceramic, Glass and Stone Tile Installation”

Care and Maintenance

One of the best things about Glass Tile is it is easy to care for. Because it is made from window glass, we use the same care

and the same cleaning products. A light spray of your favorite glass cleaner to bring it to a like new appearance should do

the trick. A soft soap solution for those tougher stains is all it take. Abrasive cleaning products should be a voided.

There is no need to seal the Glass Tile, however the grout may need to be sealed after installation. Check with the grout

manufacturer for specic details on sealing and cleaning the grout.

Disclaimer

These are general guideline only. Each installation is unique and it is the responsibility of the installer to use the correct

techniques, methods and materials to ensure a successful installation.

Installation materials, conditions and techniques have a signicant impact on the performance of glass tile. Therefore,

installations are not warranted by Bodesi Glass Tile in any way. Any defect in Bodesi product or workmanship must be

brought to attention before installation begins. No allowance will be made for labor, cost of replacement, or for any other

charges after the materials have been installed. The buyer is responsible for the inspection and acceptance of our materials

prior to installation. If any defects are noted, at the sole discretion of Bodesi Glass Tile, the defects will be replaced or

refunded on a pro-rated basis on the amount of the total order.

For best results it is important to adhere to the guidelines set out by the TCNA (Tile Council of North America) regarding materials

and installation techniques the current edition of the “TCNA Handbook for Ceramic, Glass and Stone Tile Installation”.