Specification
Bodesi Glass tiles are made from impervious glass, and therefore have the properties of being:
• Frost-proof
• Impervious to water and stains
• Highly resistant to chemical attack
• Resistant to fading and discoloration
• Easy to clean
GLASS TILE STUDIO
PRODUCT DETAILS and SPECIFICATIONS
Water Absorption
Chemical Resistance
Resistance to Freeze-Thaw
Resistance to Staining
Moh’s Hardness
ASTM C373-88 (2006)
ASTM C650-04 (2009)
ASTM C1026-13
ASTM C1378-04 (2009)
0% -Impervious
Unaected
Unaected
Unaected
>4
Critical Properties
Installation Guidlines
General installation is similar to ceramic or porcelain tiles. Due to the wide variety
of installation materials , substrates and specic situation of installation – the
installer must conform to their respective installation guidelines and parameters
as set out by The Tile Council of North America, (https://www.tcnatile.com/) and
the respective suppliers of installation materials. General guidelines and material
suggestions are available online at www.bodesi.com/installation. Please review
our installation guidlines available online.
Bodesi Glass Tile warrants its products to be free from manufacturing defects for
the life of the product, subject to the following limitations. Installation materials,
conditions and techniques have a signicant impact on the performance of glass
tile. Therefore, installations are not warranted by Bodesi Glass Tile in any way.
Any defect in Bodesi product or workmanship must be brought to attention before
installation begins. No allowance will be made for labor, cost of replacement, or for
any other charges after the materials have been installed. The buyer is responsible
for the inspection and acceptance of our materials prior to installation. If any
defects are noted, at the sole discretion of Bodesi Glass Tile, the defects will be
replaced or refunded on a pro-rated basis on the amount of the total order.
Warranty Overview
www.BODESI.com | info@bodesi.com
07/31/2019
Copyright 2019
Bodesi Glass Tile Ltd
HDDN11 R1.1