Use and Care Manual

6
How to install the handle：
1)Pull away the sealing gasket where the handle is to be installed as shown in Fig1. The
gasket is easily displaced by hand. No tools are necessary.
2)Align the handle with the screws installed. Tighten the screws using a Phillips head
screwdriver until the handle sets both flush and secured tightly against the door frame. (DO
NOT over tighten as this will cause damage to the handle assembly).
3) Install the sealing gasket to its original position.
Built-in installation
These appliances are designed for both built-in or free standing installation. For built-in
installation, ensure proper service access and ventilation, allow at least ¼” (6.35mm) space
on each side and at the top
OPERATING THE APPLIANANCE
Control Panel
C
F
°
°
1 2 3 4 5 6 7
①Lighting button
②
Temperature up
③
Display window
④Fahrenheit and Celsius indicate light
⑤Temperature down
⑥
Fahrenheit & Celsius switch button
⑦
Power button