OPERATOR MANUAL IBEA VACUUM CLEANER TURBO 50
e) Wipe up any spilled petrol. PREFACE First of all, we would like to congratulate you on having purchased an IBEA vacuum cleaner. From years of experience with machines and accessories designed for the care and maintenance of parks and gardens, our company has developed a vacuum cleaner to help you keep your lawn perfect. IBEA machines are designed for durability and complete safety so long as you carefully follow the instructions contained in this manual and use the machine correctly.
26. DO NOT try and regulate the rpm of the engine yourself. If necessary, have the engine adjusted by your authorised IBEA dealer. 28. At the time of manufacture the machine conformed to safety standards. To assure optimum performance and continued safety, use only original IBEA replacement parts. 27. Allow engine to cool before storing the machine in any enclosed space, such as a garage or storage shed.
A. Filling with oil SAE 30 of high quality (SE, SF, SG) 0,6 l. B. Filling with petrol. Use clean and fresh petrol. A B 3 On electric start models, just turn the ignition key to start the engine. ATTENTION: When the engine is already warm it is not necessary to press the pump in oder to start it. To stop the engine, move the throttle to the “STOP” position. ATTENTION: Do not mix oil and gasoline. See engine manual for further information on oil and fuel. 1. Move the throttle lever to the position. 2.
Keep hands and feet away from the chute door and the rotor under the deck. Unzip the bag to dump the contents. ATTENTION: Before unzipping the bag, make sure the engine is off and the rotor has stopped. MAINTENANCE Clean the air filter every 25 hours. Replace it every season (see engine manual for further information). Throttle cable adjustment With the throttle lever on start position, loosen the plate screw on the engine. Move the cable until the throttle is closed and then tighten the screw.
VACUUM KIT 2010 BATTERIES MAINTENANCE Assembling the kit 1. Remove the additional plug. 2. Insert the adapter into the mowerdeck. 3. Insert the hose into the adapter. 4. Insert the vacuum spout into the hose. 5. Apply the tie strap to the lower part of mowerdeck. 1. Store battery in dry and ventilated area disconnecting the battery from the wiring harness. Storage temperature should not exceed 23¡ C. 2. Avoid storing discharged batteries.
P5090253 S.P.A. Via A. De Gasperi 5 22070 Luisago (CO) - Italia Tel. 031/92.91.50 Fax 031/92.94.
