Operating instructions

6
BOC Smootharc Advance II MIG 250C Operating manual
1.3 Electrical shock
→ Never touch ‘live’ electrical parts
→ Always repair or replace worn or damagedparts
→ Disconnect power source before performingany maintenance or
service
→ Earth all work materials
→ Never work in moist or damp areas
Avoid electric shock by:
→ Wearing dry insulated boots.
→ Wearing dry leather gloves.
→ Working on a dry insulated oor where possible.
1.4 User Responsibility
→ Read the Operating Manual prior to installation of this machine.
→ Unauthorised repairs to this equipment may endanger the technician
and operator and will void your warranty. Only qualied personnel
approved by BOC should perform repairs.
→ Always disconnect mains power before investigating
equipmentmalfunctions.
→ Parts that are broken, damaged, missing or worn should be
replacedimmediately.
→ Equipment should be cleaned periodically.
BOC stock a huge range of personal protective equipment. This combined
with BOC’s extensive Gas and Gear network ensures fast, reliable service
throughout the South Pacic.
STOP
PLEASE NOTE that under no circumstances should any
equipment or parts be altered or changed in any way from
the standard specication without written permission given
byBOC. To do so will void the EquipmentWarranty.
Further information can be obtained from Welding Institute of Australia
(WTIA) Technical Note No.7.
Health and Safety Welding
Published by WTIA,
PO Box 6165 Silverwater NSW 2128
Phone [phone]