Product guide

STATUS AND PRINT TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 9-37
FCG SHOW (check finishing or feeding
device settings)
Use this command to check the settings for the finishing or feeding
devices configured for the LPS.
Logon level Levels 2 through 5.
Syntax FCG SHOW
Restrictions SHOW cannot be abbreviated to SHO.
FCG procedures Use this task to:
• Send the configuration values for a feeding or finishing device
to the printer
• Display the current device configuration values.
Configure task Table 9-12 shows the command to send feeding or finishing device
configurations to the printer.
To display all profile labels for the feeding or finishing device, enter
the following command:
FCG
To display the current device configuration values, enter the following
command:
FCG SHOW
Note: SHOW cannot be abbreviated to SHO.
Table 9-12. Parameters of the FCG SHOW (check finishing or
feeding device settings) command
Parameter Description
FCG
profile-label
profile-label
The name assigned to the feeding or finishing
device configuration.