Product guide

STATUS AND PRINT TASKS
9-34 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Jobs Status task through
command line
To display jobs status, enter the following command:
JOBS
To display only reports in the print queue (that is, waiting to be
printed), enter the following command:
JOBS Q
To display up to 100 jobs with specific statuses, enter the following
command:
JOBS ALL {DONE|RESET|ABORT|RCVY|
n }
DONE
Display jobs with the status “Done.”
RESET
Display jobs with the status “Reset.”
ABORT
Display jobs with the status “Aborted.”
RCVY
Display jobs with the status “RCVY/NS.”
n
The number of jobs for which you want status information displayed.
Configure feeding or finishing device
Use this task to:
• Send the configuration values for a feeding or finishing device
to the printer
• Display the currect device configuration values.
Configure task through windows
Perform the following steps:
Step 1. Select one of the following options from the Printer Status window’s
header auxiliary menu:
• “Feeding Configuration”
• “Finishing Configuration”
• “Feed/Finish Configuration”
Note: The option you see depends on the devices set up for
your LPS.
Depending on the option selected, one of the windows shown in
figures 9-19 through 9-21 appears on the PC UI desktop.