Product guide

STATUS AND PRINT TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 9-11
Step 2. Select one of the following:
• AUTO. This is the default selection.
• SAMPLE TRAY. The sample tray is used.
• A. Stacker bin A is used first.
• B. Stacker bin B is used first.
• C. Stacker bin C is used first.
• D. Stacker bin D is used first.
• E. The finishing device is used.
Select Stacker Bins task through
command line
To select the AUTOMODE stacking order, enter the following
command:
SELECT AUTO
To select the sample tray, enter the following command:
SELECT TRAY
To select Stacker A, enter the following command:
SELECT A
To select Stacker B, enter the following command:
SELECT B
To select Stacker C, enter the following command:
SELECT C
To select Stacker D, enter the following command:
SELECT D
To select the finishing device, enter the following command:
SELECT E