Product guide

STATUS AND PRINT TASKS

9-8 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE

Select feeder trays

Use this task to override stock selections in the print job and force

printing of a job using a specific tray, cluster, or a feeding device.

Select Feeder Trays task

through windows

Perform the following steps:

Step 1. Select the Feed Mode header button from the Printer Status window

to open the Feed Mode window (see figure 9-4).

Figure 9-4. Feed Mode window

Note: Options 5, 6, and 7 only appear if the system is

configured with these parts.

Step 2. Select one of the following options:

• To use the clusters set up in the print job, select MAIN from the

Feed Mode window.

• To feed paper from the Aux cluster, select AUX from the Feed

Mode window.

• To feed paper from all trays, select AUTO from the Feed Mode

window.

• To feed paper using a specific cluster, select Cluster... to open

the cluster window, then select an option from the displayed list.

• To feed paper from a specific tray, select the tray number from

the Feed Mode window.

• To feed paper from a bulk feeder, select 7 from the Feed Mode

window.

MAIN

AUX

AUTO

Cluster...