Product guide

JOB CONTROL TASKS
5-20 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Continue input/output
Use this task to resume interrupted input processing, printing, or
both.
Continue is also used:
• To confirm that you have completed activities such as loading
paper
• To resume operation of the LPS after a system report of a fault,
such as a paper jam.
Input and/or printing resume at the point where stopped.
• To resume both input and output processing, you may also
press the <CONTINUE> key on the keyboard
• To resume printing, you may also press the Continue button on
the printer control console.
Note: You can also open the I/O window by chording the
mouse— that is, pressing both the left and right buttons of the
mouse at the same time.
Continue Input/Output task
through windows
Through windows:
• To continue both input processing and printing, select
“Continue Input/Output” from the Job Control menu.
• To continue input processing, select “Continue Input” from the
Job Control menu.
• To continue printing, select “Continue Output” from the Job
Control menu.
Continue Input/Output task
through command line
Through command line:
• To resume both input processing and printing, enter the
following command:
CONTINUE
• To resume input processing, enter the following command:
CONTINUE I
• To resume printing, enter the following command:
CONTINUE O