User guide

UTILITIES WINDOW
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 5-19
PC Floppy Display...: Select this option from the header auxiliary
menu to open the PC Floppy Display window. Refer to figure 5-13,
Utilities>PC File Transfer>PC Floppy Display window, below.
Parameters Transfer: PC UI Hard Disk to ESS, PC UI Floppy to ESS, ESS to PC
UI Hard Disk, ESS to PC UI Floppy. Select the appropriate source
and destination option for the file transfer.
Copy/Convert: Hard Disk to Hard Disk, Hard Disk to Floppy, Floppy
to Floppy, Floppy to Hard Disk. Select the appropriate PC UI source
and destination option for the copy or convert process.
Input File ID: Enter the name of the file you want transferred,
copied, or converted. The ESS file ID can be a maximum of 10
characters (6 for the name, 1 for the period, and 3 for the extension).
If you are copying or converting a PC UI hard disk or PC UI floppy
file, the file ID can be a maximum of 12 characters (8 for the name, 1
for the period, and 3 for the extension). If you are transferring PC UI
hard disk or PC UI floppy file, the file ID can be a maximum of 10
characters (6 for the name, 1 for the period, and 3 for the extension).
Output File ID: If you want the transferred file to have a different
name on the destination device, enter the new name in the Output
File ID field. If you are copying or converting a PC UI hard disk or PC
UI floppy file, the file ID can be a maximum of 12 characters (8 for the
name, 1 for the period, and 3 for the extension). If you are
transferring a PC UI hard disk or PC UI floppy file, the file ID can be
a maximum of 10 characters (6 for the name, 1 for the period, and 3
for the extension).
Overwrite: Select this option to have the transferred file overwrite a
file with the same name on the destination device.
A message window displays if Overwrite is not selected and you
attempt to copy, convert, or transfer a file name that already exists on
the destination device. The message window gives you the option to
overwrite the destination file (Yes) or cancel the process (No).
Input Format: ASCII (DOS), ASCII (UNIX), EBCDIC, ESS. The
input file format is automatically displayed for your information if you
select the Convert header button. This field applies to Convert only.
Output Format: ASCII (DOS), ASCII (UNIX), EBCDIC, ESS. Select
the output file format you want the file converted to. This field applies
to Convert only.
Note: The length of time it takes to transfer or copy a file depends
upon the file size.
The console log print option and the PC Editor functions involving the
ESS are not available until the transfer is completed.