User guide

UTILITIES WINDOW
5-18 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
PC File Transfer
You can select the PC File Transfer task from the Utilities menu or
from the PC Editor window. Use this window to transfer files between
the ESS and the PC UI hard disk. You can also convert, copy, delete,
and display PC UI files from this window.
Figure 5-11. Utilities>PC File Transfer
Header buttons Transfer: Select this header button or press the <ENTER> key to
transfer the Input File ID from the source to the destination as the
Output File ID.
Stop Transfer: Select this header button to abort the file transfer
between the ESS and the PC UI. This header button is not available
until a transfer is started.
Copy: Select this header button to copy the Input File ID from the
source to the destination device as the Output File ID. If no Output
File ID is specified, the Input File ID is assumed. File names can be
a maximum of 12 characters (8 characters for the name, 1 for the
period, and 3 characters for the extension). Path names are not
allowed.
Convert: Select the convert option from the header auxiliary menu to
convert the Input File ID format. The converted file is stored on the
destination device under the Output File ID. If no Output File ID is
specified, the Input File ID is assumed. File names can be a
maximum of 12 characters (8 characters for the name, 1 for the
period, and 3 characters for the extension). Path names or
directories are not allowed.
PC Hard Disk Display...: Select this option from the header
auxiliary menu to open the PC Hard Disk Display window. Refer to
figure 5-12, Utilities>PC File Transfer>PC Hard Disk Display window,
below.