User guide

UTILITIES WINDOW
5-12 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Open/Edit
To access this window, select the Open/Edit... header button from
the PC Editor window.
Figure 5-7. Utilities>PC Editor>Open/Edit window
This window displays the file specified in the File ID and allows you
to edit it in a textual format.
If the ESS is specified as the source device, the system initiates a file
transfer to upload the file to the PC UI. The amount of time it takes
to transfer a file depends upon the file size. Once the file is edited, it
is transferred back to the ESS when you select the Save header
button.
Header buttons Close: Selecting this header button closes the window. If you have
changed the file but have not saved it, you are prompted to verify
whether or not you want to save the edited file.
Save: Selecting this header button saves the file (edited or not) to
the source device.
Save As...: This header button opens the Save As window. Refer
to figure 5-8. Utilities>PC Editor>Open/Edit>Save As window below.
Cut: Selecting this header button moves any highlighted text to the
paste buffer. The previous buffer contents are deleted.
Copy: Selecting this header button copies any highlighted text to the
paste buffer. The previous buffer contents are deleted.
Paste: Select this header button to copy the contents of the paste
buffer to the cursor location. Any highlighted text at the cursor
position in the file being edited is deleted when the contents of the
paste buffer are copied into the file. This header button is not
available if the paste buffer is empty.