User guide

UTILITIES WINDOW
5-2 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Compile PDL
Use this window to compile JSLs from the system disk or tape.
The PDL compilation process produces serveral output files
including a listing of source statements with error diagnostics and a
job descriptor library object file.
Figure 5-2. Utilities>Compile PDL window
Parameters File Name: Enter the filename of a source .JSL file (file-type .JSL)
which is to be input to the PDL task. If no filename is specified,
source input for PDL is read from tape and a JDL disk file is created
for each SYSTEM command encountered in the first file read from
tape.
Device: Disk
, TD0, TD1, TD2. Enter/select the source of the .JSL
file (system disk or tape).
If a tape device (TD0, TD1, TD2) is selected as the source, only the
first file on the unlabeled tape can be read.
Destination: Bin
, Sample Tray. Select/enter the output destination
for the listings and diagnostics from the PDL compilation.
Source File: Selecting this option creates .JSL source files when the
input is from tape. This option has no effect when input is from disk.
Print: Selecting this option prints the PDL source records during
compilation, along with source records which contain errors, the
diagnostics which apply to those lines, and the PDL summary
reports. If an error occurs, a printout is produced even if the Print
option is not selected.
Replace: Selecting this option specifies that the PDL task may
replace an existing job control file with a new output file of the same
name.
Rewind: Selecting this option rewinds a tape after a tape file is
processed.
Display: Selecting this option displays detailed error messages on
the PC UI screen. This option does not display JSL source lines.