User guide

FILES WINDOWS
3-10 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Unlabeled Tape to Disk
Use this window to write files from an unlabeled tape to the system
disk.
Header buttons Initialize: Prepares a new tape for writing with a density of 1600 bpi.
Initialize 1600: Prepares a new tape for writing with a density of
1600 bpi.
Unload: Rewinds and unloads a tape from the tape drive.
Rewind: Rewinds the tape on the specified tape device.
Initialize 6250: Prepares a new tape for writing with a density of
6250 bpi.
Rewind: Rewinds the tape on the specified tape device.
Unload: Rewinds and unloads the tape on the specified tape device.
Parameters Tape Device: TD0
, TD1, TD2. Select/enter the tape device that you
want the file copied from.
Disk ID: Default
, DP0, DP1, DP2, DP3. Select/enter the disk that
you want the file written to.
File ID: Enter the name of the tape file that you want copied to disk.
Use the form “filename.filetype”.
Format: EBCDIC
, ASCII. Select/enter the format of the tape from
which data is to be written.
Copy To/From Floppy
Select the Copy To/From Floppy option from the Files menu to back
up files to floppy diskette, or to restore rigid disk files.
Figure 3-8. Files>Copy To/From Floppy window