User guide

FILES WINDOWS
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 3-9
Copy Unlabeled Tapes
In order to write file to tape, a writable tape unit must be available on
the system. No initialization process (such as, TAPE VOLINIT) is
necessary when writing to an unlabeled tape.
Figure 3-7. Files>Copy Unlabeled Tapes window
Disk to Unlabeled Tape
Copying files from the disk to unlabeled tape.
Header buttons Initialize: Prepares a new tape for writing with a density of 1600 bpi.
Initialize 1600: Prepares a new tape for writing with a density of
1600 bpi.
Unload: Rewinds and unloads a tape from the tape drive.
Rewind: Rewinds the tape on the specified tape device.
Initialize 6250: Prepares a new tape for writing with a density of
6250 bpi.
Parameters Tape Device: TD0
, TD1, TD2. Select/enter the tape device that you
want the disk file written to.
Disk ID: Default
, DP0, DP1, DP2, DP3. Select/enter the disk that
you want the file copied from.
Format: EBCDIC
, ASCII. Select/enter the format of the tape to be
written.
File ID: Enter the name of the file that you want writtten to unlabeled
tape. Use the form “filename. filetype”.