User guide

FILES WINDOWS
3-6 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Copy Labeled Tapes
Use this window to copy files residing on the system disk to tape and
files on tape to disk.
Figure 3-5. Files>Copy Labeled Tapes window
Disk to Labeled Tape
Selecting the Find header button from the Copy Labeled Tapes
window opens the Find window, which prompts you to enter the
name of the file you want to locate.
Header buttons Find...(Find File ID): Searches an LPS-labeled tape for the
specified File ID, and positions the tape prior to the label record of the
file.
Skip: Positions the tape after a specified number of files.
Next: Locates the next tape header and displays the file name.
Initialize: Prepares a new tape for writing with a density of 1600 bpi.
Initialize 1600: Prepares a new tape for writing with a density of
1600 bpi.
Initialize 6250: Prepares a new tape for writing with a density of
6250 bpi.
Rewind: Rewinds the tape on the specified tape device.
Unload: Rewinds and unloads the tape from the specified tape
device.
Parameters Tape Device: TD0
, TD1, TD2. Select/enter tape device that you
want the disk file written to.
Disk ID: Default
, DP0, DP1, DP2, DP3. Select/enter the disk that
the file should be accessed from.