User guide

USING THE PC UI
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 1-11
• A limited number of PC UI-specific messages. At startup, these
messages display in English-only to inform you when the PC UI
and ESS cannot communicate or when the console log is being
repaired.
• Command line window and output fields contents that were
displayed before the language change.
To redisplay the console log in the currently selected language, close
the console log window and select the Display header button in the
Display Console Log window. The console log is printed and
converted using the currently selected language.
Upon reboot or power up, the PC UI screen returns to the same
language that was in use at the time of the reboot. For example, if
French was the language in use at the time of the reboot, the screen
again appears in French when the PC UI recovers.
You must insure that the proper language is installed on the system
controller (ESS) and printer (IOT). The selection of the Language
icon on the PC UI does not switch the language on the ESS or on the
IOT. TEM mode reflects the language of the ESS.
Print Tasks icon This icon allows you to access the Print Tasks menu. A few of the
tasks you can perform through Print Tasks windows are:
• Start an online or offline job
• Monitor job status
• Set paper tray sizes and bin stacking limits
• Set clusters.
Job Control icon This icon allows you to access the Job Control menu. A few of the
tasks you can perform through Job Control windows are:
• Stop, continue, or abort a job
• Clear the job queue
• Adjust print alignment
• Sample files.
System Control icon This icon allows you to access the System Control menu. A few of
the tasks you can perform through System Control windows are:
• Change logon level or password
• Restrict command usage (RCU)
• Back up, display, print, or empty the console log
• Exit to DOS.
Accounting icon This icon allows you to access the Accounting menu. A few of the
tasks you can perform through Accounting windows are:
• Access the list of completed reports (status file service)
• Access activity and user report information
• Print billing statistics.