User guide

USING THE PC UI
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 1-9
• Display Faults. Select this button to display a list of all
outstanding printer faults.
Note: Entering FHI has the same effect as selecting the
Display Faults button.
• Continue. Select this button to resume input processing
and printing.
• Close All Windows. This button is located in the auxiliary
menu. Select this button to close all open windows on the
desktop, except for the Command Line/Message window.
The Close All Windows button is a quick way of clearing the
desktop.
• Auto Scroll. This button is located in the auxiliary menu.
Select this button to turn vertical auto scrolling on and off for
the message window.
3. Work Area. Windows and opened menus display in this area.
Windows open in a specific place on the desktop and are a
specified size. You can leave windows open, move them
around, resize them, and generally arrange the work area to
suit your needs. During a session, windows maintain their last-
used size and location. However, after the PC UI is powered
off, rebooted, or you select the Exit to DOS task, the windows
return to their default size and location.
4. System status and source information is displayed at the
bottom of the desktop window.
• ’Input’ identifies the job input source (Tape, Disk) and input
status (Processing, Idle, Stopped, Inactive).
• ’Output’ identifies output job status (Printing, Idle, Stopped,
Inactive, Jammed).
• ’Remote’ identifies the remote job input source (XPAF) and
remote source status (Not Ready, Offline, Suspended,
Waiting, Receiving, Sending).