User guide

SYSTEM CONTROL WINDOWS
8-40 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Exit to DOS
Select the Exit to DOS option from the System Control menu to put
the PC UI in DOS mode in order to run DOS applications or to safely
power off the PC UI.
This option puts the PC UI in a safe state, preventing any loss of
records from the console log. If a record is being written to the
console log, the PC UI finishes writing that record to the log and then
stops all activities, including communication with the ESS.
Once the PC UI is in DOS mode, you can turn the PC UI power off.
To log on, turn the power switch off and on or press the Boot/Reset
button on the PC UI (or press <CTRL> <ALT> <DEL>).
To return to windows mode, enter MANUI at the DOS prompt.
Note: DOS applications cannot be run from within the PC UI
windows mode of operation. You must exit to DOS to run DOS
applications.
Figure 8-35. System Control>Exit to DOS confirmation window