User guide

SYSTEM CONTROL WINDOWS
8-34 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
disk is still more than 86% full, the current disk full percentage is
saved as the starting percentage.
If the “Continue“ button is selected followed by selection of the Apply/
Close header button, the printer continues. The printer does not
actually stop despite the fact that the disk is approaching full.
If the “Audit Log Administration“ button is selected followed by
selection of the Apply/Close header button, the Audit Log
Administration window will open. This will allow the deletion of
information on the disk.
When the Audit Log disk is full, the same window will appear but the
message will read:
“The Audit Log hard disk is FULL and audit data has been lost.
All incoming audit data will be lost until unneeded Audit Logs
have been deleted.”
The printer will be sent a STOP command and will stop after all in-
process sheets are delivered. All audit data from the time the audit
disk became full until the printer stops will be lost. Audit logging
stopped when the disk became full and cannot continue until space
becomes available. The “Continue” header button on the window will
be unavailable and the user must open the Audit Log Administration
window and delete unneeded logs from the disk. Only the Audit Log
Administration window and windows called up through it will be
available until the user closes the Audit Log Administration window
after making space on the hard disk. Unless the user deletes
unneeded logs from the hard disk, all audit data will be lost.
Defaults . . . - Selecting this header button of the Audit Log
Administration window enables the user to set defaults for the Audit
Log through the Audit Log Defaults window.