User guide

USING THE PC UI
1-2 XEROX DOCUPRINT 180 LPS PC UI REFERENCE
Powering on the PC UI
Note: The switches described for the PC UI may not be in the
positions shown because of the different PC UIs. Refer to your PC UI
documentation for the locations.
Figure 1-2. Power switch on the PC UI
1 Set it to ON (1).
Figure 1-3. Power button on the PC UI monitor
1 Power on the PC UI monitor by pressing the Power button
on the front bottom of the monitor.
Some information appears on the screen as the PC UI starts. Next,
the Wait cursor appears (refer to the “Types of cursors” section later
in this chapter). Next, you see the screen depicted in figure 1-4.