User guide

SYSTEM CONTROL WINDOWS
XEROX DOCUPRINT 180 LPS PC UI REFERENCE 8-21
Header buttons List - Selecting this header button lists all logs of reports or jobs in
the menu field in the lower left corner of the window. What is listed in
the menu field is specified by:
• the Device: parameter,
• the Audit: parameter,
• the Sorted By: parameter, or
• the List Logs: parameter.
Selecting a job or report from the menu field captures it in the Report/
Jobs: field. Only completed reports and only reports in a job that
have completed printing are listed. If no logs appear in the menu
field, after selecting the List target, then there are no logs that have
the currently selected parameters.
Print . . . - Selecting this header button displays the Audit Log Print
Options window for the selected report or job. Refer to the description
of the Audit Log Print Options window.
Display . . . - Selecting this header button initiates a display of the
report based on your selections in the Audit Log Display Options
window. Refer to the description of the Audit Log Display Options
window.
Save . . . - Selecting this header button saves the report in the
Report: field. The Device selection determines where the source log
is stored. This header button is only available for Audit: Report. Refer
to the description of the Audit Log Save window.
Stop Print - Selecting this header button stops the printing of an
Audit Log. It is only available from the time the Apply/Close header
button on the Print Options window is selected until it finishes being
transferred to the controller.
Stop Save - Selecting this header button stops the Audit Log Save
that is currently in process. It is only available from the time the Apply/
Close header button or the Apply header button on the Audit Log
Save window is selected until the log is finished being saved to the
selected destination.